You set the pitch yourself so that your boat performs at its best in all
situations (e.g. for water-skiing, or when carrying light or heavy loads).
With the correct propeller setting, your fuel consumption will decrease
while your speed and performance increase.
If a blade is damaged, you can easily replace it on the spot and
carry on with your trip immediately. This is cheaper than paying
repair bills or buying a new propeller
a propeller for every situation
Stronger than aluminium. ProPulse is 100% recyclable.
Unlike an aluminium propeller, ProPulse is not subject to
corrosion or cavitation damage. The finish will be as new,
despite many years of use.
The ProPulse propeller is 40% lighter than an aluminium propeller,
thus reducing the strain on your transmission and gear
mechanism, and ensuring your engine a longer service life.
ProPulse propellers have been designed with the aid of the most
recent hydrodynamic research. The use of 3-D CAD ensures
maximum accuracy. We have placed a great deal of importance on
strength and performance tests.
ProPulse is a Swedish quality product that has been tested in great
detail, resulting in a 10-year warranty on the hub.
The single most important and in many cases neglected part that determines how your boat will perform is
the propeller. Just a minor defect on the prop or wrong choice of prop can totally alter the boats performance.
Now with ProPulse you very easily bring out your boat's optimum performance for every situation.
Four Seasons Marine Ltd
Marine Products For The 21st Century
THE 2nd GENERATION S6, S8 & S9 PROPULSE PROPELLERS ARE NOW RELEASED
The 2nd Generation Propulse propellers with a
NEW MATERIAL used in the blades and an improved
hub makes the prop perform much better than
conventional Aluminium and S/S props.
The 8901 fits the following outboards:
60-140Hp 2 stroke 3/4 cylinder engines with standard gear case.
60-70Hp 4 stroke.
60-70Hp 4 stroke
75-140Hp 2 and 4 stroke.
The 8902 fits the following outboards:
Mercury 40-60Hp 4-Stroke Big Foot
60Hp 2-Stroke Bigg Foot
70-150Hp in line 3/4/6 cyl 75-115Hp 4-Stroke
Yamaha FT50Hp 4-Stroke 80-115Hp 4-Stroke 60-140Hp
Force 90-150Hp 1995-
Suzuki 90-140Hp 4-stroke
The 9901fits the following outboards and stern drives.
Johnson/Evinrude 90-140Hp V4 with large gearcase
150-235Hp 2-Stroke V6
OMC Sterndrives 3,0 L-5.7 L Model 800 Cobra & King Cobra 1978 -
The 9902 fits the following outboards and stern drives.
Mercury, Honda, Yamaha, Suzuki 135-300Hp.
Mercruiser AlphaOne and BravoOne 120-300Hp
The 9903 fits Volvo OMC 3.0L - 5.7 L
Models SX, SX Cobra & OMC Cobra
New Material used in the blades.
The main difference in the new material is that it has a
crisscross fibre structure and a slightly higher level of
glass fibres. The blades become in this way much more
rigid and provides improved performance in general but
especially on heavier boats with big Hp engines.
The new material also makes the blades about 70%
stronger than aluminium blades.
Boats tested have shown a speed increase of 2-4 knots at
the top half of the speed range.
A steel reinforcement ring has now been
inserted in the hub to accommodate the
new stronger blades on the S8 and S9
The 6902 fits the following outboards:
Johnson/Evinrude 4-stroke 40-50Hp,
Mercury/Mariner 4-stroke 25-60Hp 2-stroke 30-70Hp but not for Bigfoot
and Mercury lite.
Force 40-50Hp 2-stroke 95- Force 70Hp 91-,
Suzuki 2-stroke 40-65Hp 4-stroke 40-50Hp,
Yamaha 4-stroke 30-60Hp 2-stroke 40-50Hp.